|
|
 |
Raggedstone1
Spartan
-3
FPGA
Development BoardDesign Services Intellectual Property Design Rescue Seminars Support Contact History News Careers TechiTips Partners
| |
Useful Web Resources
Programming Raggedstone1 User Guide. Go Here.
EwirETM
EwirETM support for Raggedstone1 is coming soon.
Board Features
Price
RS1-400C (XC3S400) GBP £80(
approx €120, US$160) excluding taxes and duties. Bundled with PCI I/O Header GBP £95 (approx €143, US$190) excluding taxes and duties). Purchase here.RS1-1500C (XC3S1500) GBP £140 (approx €210, US$280) excluding taxes and duties.
End brackets are now included in above prices (they are not included in OEM packs).
OEM Pricing
| 5 Pack(each) | 10 Pack(each) | 25 Pack(each) | 50 Pack(each) | 100 Pack(each) | |
| RS1-400C | GPB£ 70 | GBP£ 65 | GBP£ 60 | GBP£ 55 | GPB£ 50 |
| RS1-1500C | GPB£ 120 | GBP£ 110 | GBP£ 100 | GBP£ 95 | GBP£ 90 |
| RS1-400I | GBP£ 100 | GBP£ 95 | GBP£ 85 | GBP£ 80 | GBP£ 70 |
| RS1-1500I | GBP£ 160 | GBP£ 140 | GBP£ 120 | GBP£ 110 | GBP£ 105 |
FPGA
XilinxTM
SpartanTM-3 FPGA, in FG456
package. RS1-400 has XC3S400 fitted to the board. RS1-1500 has XC3S1500 fitted
to the board.
PCI INTERFACE
32 bit, 33 MHz, 3.3/5V PCI interface.
Flash Memory
4Mbit Flash Memory
EEprom Memory
1 x 16KBit serial EEprom fitted.
Temperature Sensor
1 x LM75 Temperature Sensor fitted.
DIL Headers
2 sets of DIL Headers supporting DIL components or modules.
Segment Display
4 digit LED - removable to give extra I/O.
LEDs
4 LEDs.
LVDS Clock Module Header
Supporting Enterpoint's LVDS clock module. Header can also be used as I/O. Details here.
3V DIL Oscillator Socket
Takes 3.3V oscillator in 8 pin DIL size.
Push Switches
2 push switches fitted.
SPARTAN-3
BANK I/O VOLTAGES
4 banks have a fixed I/O voltage of 3.3V. 4 banks individually support
2.5V / 3.3V or user supply by jumper selection.
DCI
User fit DCI resistors. VRN/VRP can also be used general I/O when not used for DCI.
User I/O
Large number of user I/O available.
Programming Cable
Raggedstone1 ships with our free PROG2 programming cable. The is a Parallel Cable III look-alike and is detected by Xilinx tools as such. A 3M extension lead is available for £4. International customers are advised that the extension lead weighs approximately 400g and will affect carriage price if purchased with other items.
Coprocessor Module
We are doing a special version of our Drigmorn1 product that allows it to be used as a Coprocessor, Flash memory, SRAM, Clock Generator and RS232 for Raggestone1. Details of Drigmorn1 are here.
Optional Add-On Modules
We have a wide range of modules available to fit the DIL headers on our Raggedstone and Broaddown products. For more details go here.
 |
 |
 |
|
 |
 |
 |
|
 |
 |
 |
|
 |
 |
Oscillator Packs
We can supply packs of 3.3V oscillators to fit
into the 3.3V 8 pin DIL socket on Raggedstone1
as follows: Pack1 - 14.7456MHz, 18.432MHz, 27.00MHz,
32.00MHz and 50.00 MHz Pack2 - 3.6864MHz, 14.31818MHz, 24.576MHz,
60.00MHz, 66.00MHz Pack3 - Pack1 plus Pack2 plus 80.00MHz Courier Charges Currently we normally ship with internationally with FEDEX
International Priority service unless you chose the low cost carriage option below.
If we get the order to us before 14.00 GMT(UK), 12.00 GMT(EEC)
and 10.00 GMT (US) you will normally get delivery next day.
Other locations may be 2/3 days delivery. Shipping rates below are for single board shipments. Multiple board
shipments - please ask for a price. Low Cost Carriage Option NEW - We can now offer a Raggedstone1
board with low cost carriage worldwide. This service uses national mail services
and normally delivers within 7 working days (not
guaranteed). The low cost
carriage price for a single board, or single board with PCI I/O
Header, is £10 (approx
€15,
US$18). Taxes and Duties For the UK we will apply 17.5% VAT to goods
and courier charges. For non-UK EEC countries we will apply 17.5%
VAT to goods and courier charges unless you can supply a VAT
number, with registration details, that we can verify. If we can
not fully verify your VAT details then VAT will be
applied at 17.5%. The application of zero rate VAT to a shipment
will be at our discretion under advice from UK Customs and
Excise. If items are shipped at zero rate VAT you will
responsible for accounting for VAT to your local authorities. No
other duties or taxes should apply to products shipped to the
EEC countries.
USA - We believe that Raggedstone1 should not
attract duty or a MFP (manufactured foreign product) fee above US
$2. The postal service or courier may charge handling if there
is a collection of such a fee. This is our understanding of the
rules but you should make you own enquires to confirm this.
Please give us feedback if you can confirm or add to this
understanding. We are hoping to offer a "duty paid" price to the
US, for Raggedstone1, once we have a definitive understanding of
the rules. For other countries duties and taxes do vary.
Applying duties and
taxes may be collected by the courier,
or postal service, from you upon delivery. Please check with
your local authorities if you are unsure of rates. We will add
more information as we find it out on other countries.
DERIVATIVE,
TURNKEY or MODULE DESIGNS
Pack1,2
Price / Region
UK Pounds
Euros(approx)
US Dollar(approx)
United
Kingdom
£10
EEC
Countries
€15
USA and
Canada
$20
Pack3
Price / Region
UK Pounds
Euros(approx)
US Dollar(approx)
United
Kingdom
£20
EEC
Countries
€30
USA and
Canada
$40
Region
UK Pounds
Euros (approx)
US Dollar(approx)
United
Kingdom
£6
EEC
Countries
€33
USA and
Canada
$44
We are happy to offer derivative designs of Raggedstone1 to customers
with special requirements. Subject to requirements and part
availability we can usually deliver prototypes of turnkey custom
designs in approximately 6 to 10 weeks. We can also offer custom
expansion modules. We can usually deliver module prototypes in 2 to 4
weeks subject to part availability. Please ask for a quote if you are
interested in these services.