 |
Drigmorn3 FPGA
Development Board
Design
Services Intellectual
Property Design Rescue
Seminars Support Contact
History News Careers
TechiTips Partners
|
|
|
User Manual Contstraints Schematics Add-on Modules USB Drivers Drigmorn3 is an advanced SpartanTM-6 development board suitable as teaching/learning platform but also for advanced industrial control functions. It designed to support FPGA embedded microprocessors including MicroBlazeTM with supporting features such as Flash, DDR3 and EEprom memory. Ethernet and USB interfaces provide a high performance communications capability and these features can be further expanded by add-on modules fitted in the DIL Header. The LCD, PS2, switches and 4 sets of traffic light LEDs complete the specification facilitating human interfacing for interactive use.
|
GBP £160, USD $270, Euro 200 with parallel port programmig cable. Add GBP £50, Euro 70, USD $80 when supplied with USB programming cable Prog3.
FPGA
Drigmorn3 comes fitted with XC6SLX16-2CSG324CES Spartan-6 fitted.
Flash Memory
Drigmorn3 has a M25P128 (128 Mbit) serial flash that is used for both configuration of the FPGA and for user application storage.
DDR3 Memory
Drigmorn3 has a 1 Gbit, X16, DDR3 SDRAM.
EEPROM Memory
Drigmorn3 has a 24C16 EEPROM.
Ethernet
Drigmorn3 has a KSZ8851SNL based 10/100 Ethernet.There is also a unique MAC address chip on board.
Real Time Clock
Drigmorn3 has a DS1306 real time clock. A supporting battery holder is also provided.
Memory Card Socket
Drigmorn3 supports a small format memory card.
PS2
Drigmorn3 has 2 PS2 interfaces.
Display
Drigmorn3 has a 16x2 LCD display. There is an OEM option not to fit this and instead have a IDC 2x34 header allow remote location of the display or other function.
LEDs
4 sets of Traffic Lights (red, amber,green) and 1 single LED are available to use.
DIL HEADER
40 I/O that are 5V tolerant and can support 20 pairs of LVDS. Header supports 3.3V and GND power strips allowing multiple add-on modules fitted in the header.
Top IDC Header
20 I/O (3.3V tolerant) are supported on 40 way Top IDC header.
USB
Drigmorn3 has a FT232RQ interface for simple USB connection to a host PC.
Oscillator
Drigmorn3 has a 50MHz oscillator on board.
Accelerometer
Drigmorn3 has a 3 axis accelerometer.
Switches
Drigmorn3 has 2 press switches and 4 bit dip switch.
Optional Add-On Modules
 |
 |
 |
|
 |
 |
 |
|
 |
 |
 |
|
 |
OEM Options and Pricing
We can offer variants of Drigmorn3 either with non-standard Bill of Materials or even with customised PCBs. We can also offer a custom add-on module service. These options may be subject to additional charges and minimum order quantities.
Standard versions of this board are available with the following OEM discounts. Programming cables are not included in these prices.
| QUANTITY | 5 | 10 | 25 | 50 | 100 |
| DN3-LX16C | GBP £150 | GBP £145 | GBP £140 | GBP £135 | GBP £125 |
Other Products
 |
 |
 |
 |
|
| Drigmorn2 | Craignells | Darnaw | Raggedstone1 |